Specs
iRig Acoustic Stage Specifications
Dedicated iRig Acoustic Microphone
- Microphone Type: MEMS
- Polar Pattern: omnidirectional
- Frequency Response: 30 Hz - 20 kHz, +/-3dB
- Max SPL: 130dB SPL
- Signal-to-Noise Ratio: 101 dBA
- Maximum soundboard thickness: 4mm / 0.16"
Connections
- Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32" TS mono jack
- AUX Instrument Input Connector: 6.3mm / 1/4" TS mono jack
- AUX Instrument Input Impedance: 1 MOhms
- Analog Output Connector: 6.3mm / 1/4" TS mono jack, line-level, low impedance
- Analog Output Impedance: 50 Ohms (can drive long cables without any loss)
- Digital Output Connector: micro-USB
DSP/Interface
- AD and DA Resolution: 32-bit
- Sampling Rate: 48 kHz
- Interface Output: USB class compliant audio output via micro-USB port
- Power: battery power (2xAA), USB bus power
- Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)
Package includes
- iRig Acoustic Stage DSP/interface
- iDedicated iRig Acoustic microphone
- iBelt clip
- iCarrying case
- i2 x 1.5V AA Battery
Dimensions
- DSP/Interface size: 101mm/3.98" x 72.3mm/2.85" x 23mm/0.91" (belt clip excluded)
- DSP/Interface weight: 99g/3.49oz (batteries excluded)
- Microphone size: 31.7mm/1.25" x 32.2mm/1.27" x 18.8mm/0.74"
- Microphone weight: 20g/0.71oz
- Microphone cable length: 150cm/59.1"
Compatibility
iRig Acoustic Stage can be connected to any amplifier, mixer or PA system using a 6.3mm / 1/4" TS mono jack cable.
iRig Acoustic Stage can also be used as USB recording interface for Mac/PC, iOS, Android.
Computers
Mac®: Mac OS X 10.6 or later. One free USB port. A USB to Micro-USB cable (sold separately) is required.
Windows®: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio. See our FAQ here for further details.) A USB to Micro-USB cable (sold separately) is required.
iOS Devices
Compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini. iOS 6.0 or later is required.
A USB to Micro-USB cable (sold separately) and a Lightning to USB Camera Adaptor (sold separately) are required.
Also compatible with all newer iPhone, iPad and iPod touch models.
Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
A Micro-USB-OTG to Micro-USB cable (sold separately) is required.
