iRig Recorder 3

Adjust the start and end of your recording, then "crop" to keep only the selected portion or "cut" to delete the selection. You can also loop the selection.

Note that when you apply a edit to a recording, it does not overwrite the original recording. Instead, iRig Recorder creates a new file with the process applied. This way you don’t lose your original recordings.

Included in:

• iRig Recorder
• All Functionalities Bundle

The Brighten Voice processor optimally increases the high frequencies in your recordings. The STRENGTH slider determines how much brightness will be added to your audio – settings that are too high can make the audio sound harsh or strident, so be sure to set this control carefully. Select MALE or FEMALE depending on the gender of the speaker or singer to get the best performance from the processor. Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Brighten Voice process applied.

Included in:

• iRig Recorder
• All Functionalities Bundle
• Processors Bundle

The Cleanup processor uses digital signal processing to reduce the amount of noise in your recordings. The STRENGTH slider determines how much noise will be removed from your audio – settings that are too high can also remove the important parts of your recording such as the actual speech or music, so be sure to set this control carefully. Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Optimize Tone process applied.

Included in:

• iRig Recorder
• All Functionalities Bundle
• Processors Bundle

The Optimize Tone processor uses digital signal processing to equalize or “even out” the spectrum of your recordings for optimal tonality. Select whether your source recording contains speech or music by tapping the SPEECH or MUSIC buttons. If your recording is a mixture of speech and music, select MUSIC. The BALANCE slider determines the whether the processing will make your recording more warm (more bass frequencies) or more crisp (more treble frequencies). Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Optimize Tone process applied.

Included in:

• iRig Recorder
• All Functionalities Bundle
• Processors Bundle

The Optimize Volume processor uses digital signal processing to set your recordings to the optimal level for both speech and music. Select whether your source recording contains speech or music by tapping the SPEECH or MUSIC buttons. If your recording is a mixture of speech and music, select MUSIC. The STRENGTH slider determines the percentage of optimization that will occur. The default is 90%, a good setting for most applications. Move the slider to the left for less of the optimization process; move it to the right for maximum volume optimization. Press the PREVIEW button to hear the Optimize Volume process without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Optimize Volume process applied.

Included in:

• iRig Recorder (by registering)
• iRig Recorder FREE (by registering)
• iRig Recorder 3 for Android (by registering)

The Pitch Shift processor changes the pitch of your recorded audio either up or down. Move the slider to the left to lower the pitch or to the right to raise the pitch. The Pitch Shift amount is displayed in semitones (half steps, chromatic notes on a piano or single frets on a guitar). Press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Pitch Shift process applied.

Included in:

• iRig Recorder
• All Functionalities Bundle
• Processors Bundle

The Smooth Voice processor takes the harshness out of your recordings. The STRENGTH slider determines how much of the smoothing effect will be added to your audio – settings that are too high can make the audio sound dark or dull, so be sure to set this control carefully. Select MALE or FEMALE depending on the gender of the speaker or singer to get the best performance from the processor. Move the slider to taste, and press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the Smooth Voice process applied.

Included in:

• iRig Recorder
• All Functionalities Bundle
• Processors Bundle

The Slow Down processor literally slows down the speed of your recordings but without changing the pitch. The SLOW DOWN slider determines how much you will slow down your recording. When the slider is all the way to the right (100%), your audio will play its normal speed. Move the slider to the left to slow down your audio to a maximum of 50% (half the original speed). Press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the process applied.

Included in:

• iRig Recorder
• All Functionalities Bundle
• Processors Bundle

The Speed Up processor literally speeds up the speed of your recordings but without changing the pitch. The SPEED UP slider determines how much you will slow down your recording. When the slider is all the way to the left (100%), your audio will play its normal speed. Move the slider to the right to speed up your audio to a maximum of 200% (double the original speed). Press the PREVIEW button to hear what the process does to your audio without actually changing your recording. When you are satisfied with the results or your settings, press APPLY to create a new recording file with the process applied.

Included in:

• iRig Recorder
• All Functionalities Bundle
• Processors Bundle